Mazda CX-52017 Owner'S Manual Download Page 162

Page: 162 / 664

4–18

When Driving

Instrument Cluster and Display

Distance-to-empty mode

This mode displays the approximate

distance you can travel on the remaining

fuel based on the fuel economy.

The distance-to-empty will be calculated

and displayed every second.

NOTE







Even though the distance-to-empty

display may indicate a suf

cient amount

of remaining driving distance before

refueling is required, refuel as soon as

possible if the fuel level is very low or

the low fuel warning light illuminates.







The display may not change unless you

add more than approximately 9 L

(2.3 US gal, 1.9 Imp gal) of fuel.







The distance-to-empty is the

approximate remaining distance the

vehicle can be driven until all the

graduation marks in the fuel gauge

(indicating the remaining fuel supply)

disappear.







If there is no past fuel economy

information such as after

rst

purchasing your vehicle or the

information is deleted when the battery

cables are disconnected, the actual

distance-to empty/range may differ from

the amount indicated.

Average fuel economy mode

This mode displays the average fuel

economy by calculating the total fuel

consumption and the total traveled

distance since purchasing the vehicle, re-

connecting the battery after disconnection,

or resetting the data. The average fuel

economy is calculated and displayed every

minute.

To clear the data being displayed, press the

INFO switch for more than 1.5 seconds.

After pressing the INFO switch,

- - - L/100 km (- - - mpg) will be displayed

for about 1 minute before the fuel

economy is recalculated and displayed.

Current fuel economy mode

This mode displays the current fuel

economy by calculating the amount of fuel

consumption and the distance traveled.

Current fuel economy will be calculated

and displayed every 2 seconds.

When you've slowed to about 5 km/h

(3 mph), - - - L/100 km (- - - mpg) will be

displayed.

CX-5_8FN1-EA-16L_Edition1.indb 18

2016/12/12 10:05:43

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands