Mazda CX-52017 Owner'S Manual Download Page 508

Page: 508 / 664

6–32

Maintenance and Care

Owner Maintenance

6. After pulling the blade rubber in the

direction of the arrow and sliding the

blade rubber to a position to check the

blade holder groove, slide the blade

rubber end in the opposite direction.

Groove

7. Make sure that the blade rubber is

correctly installed to the blade holder.

8. Align the wiper arm tabs with the blade

component grooves.

Tabs

Grooves

9. Align the blade component projection

with the wiper arm notch.

Notch

Projection

10. Slide the blade component and install it

to the wiper arm.

11. Slowly lower the wiper arm onto the

windshield.

Replacing Rear Window Wiper

Blade

When the wiper no longer cleans well, the

blade is probably worn or cracked.

Replace it.

CAUTION

To prevent damage to the wiper arm
and other components, do not move
the wiper by hand.

CX-5_8FN1-EA-16L_Edition1.indb 32

2016/12/12 10:07:10

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands