Mazda CX-52017 Owner'S Manual Download Page 456

Page: 456 / 664

5–128

Interior Features

Audio Set [Type B (touchscreen)]

Symptom

Cause

Solution method

Unable to perform pairing

The Bluetooth

function and the

Find Mode/Visible setting

on the

device may turn off automatically

after a period of time has elapsed

depending on the device.

Check whether the Bluetooth

function and the Find Mode/Visible

setting

on the device are turned on

and pairing or reconnect.

Does not connect automatically

when starting the engine
Automatically connects, but then

disconnects suddenly

Disconnects intermittently

The device is in a location in which

radio wave interference can occur

easily, such as inside a bag in a rear

seat, in a rear pocket of a pair of

pants.

Move the device to a location in

which radio wave interference is less

likely to occur.

Does not connect automatically

when starting the engine

The pairing information is updated

when the device OS is updated.

Perform pairing using the following

procedure:

1. Delete the applicable Bluetooth

device on the Mazda Connect.

2. Delete “Mazda” from the

Bluetooth

search screen of the

Bluetooth

device.

3. Perform pairing again.
If pairing is not possible after trying

the procedure, turn off the power

of the Bluetooth

device once, then

turn it back on. If pairing is still

not possible after this, contact an

Authorized Mazda Dealer or Mazda

Bluetooth

Hands-Free Customer

Service.

*1 Setting which detects the existence of a device external to the Bluetooth

unit

CX-5_8FN1-EA-16L_Edition1.indb 128

2016/12/12 10:06:59

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands