Mazda CX-52017 Owner'S Manual Download Page 584

Page: 584 / 664

7–42

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Power Liftgate Warning Beep

If system operation precautions are

necessary, the driver is noti

ed by the

warning sound.

Cautions

What to check

The beep sounds 3 times

The conditions required

for the power liftgate

to operate have not

been met, such as an

object being stuck in the

liftgate.

The beep sound

continues

The vehicle is being

driven with the liftgate

open. Stop the vehicle

and close the liftgate.

Electric Parking Brake (EPB)

Warning Beep

The warning buzzer is activated under the

following conditions:







The vehicle is driven with the electric

parking brake (EPB) applied.







The electric parking brake (EPB) switch

is pulled while the vehicle is driven.

AUTOHOLD Warning Beep

Warning light

ashes/message is

displayed and beep sound is activated

simultaneously for about

ve seconds

when using AUTOHOLD function or

when AUTOHOLD switch is operated.

Because a problem with AUTOHOLD

function has occurred, AUTOHOLD

function does not operate even if

AUTOHOLD switch is operated.

If the warning light

ashes/message is

displayed and the beep sound is activated

simultaneously, have your vehicle

inspected at an Authorized Mazda Dealer.

Power Steering Warning Buzzer

If the power steering system has

a malfunction, the power steering

malfunction light turns on or

ashes and

the buzzer operates at the same time.

Refer to Warning Indication/Warning

Lights on page 4-33 .

Tire In

ation Pressure Warning

Beep

The warning beep sound will be heard

for about 3 seconds if the tire pressures

decrease.

If the tire pressure decreases extremely,

a beep sound will be heard for

approximately 30 seconds.

Refer to Tire Pressure Monitoring System

on page 4-172 .

Blind Spot Monitoring (BSM)

Warning Beep

Driving forward

The warning beep operates when the turn

signal lever is operated to the side where

the Blind Spot Monitoring (BSM) warning

light is illuminated.

NOTE

A personalized function is available to

change the Blind Spot Monitoring (BSM)

warning beep sound volume.

Refer to Personalization Features on page

9-11 .

Reversing

If a moving object such as a vehicle or

two-wheeled vehicle approaches on the

left or right from behind your vehicle, the

Blind Spot Monitoring (BSM) warning

sound is activated.

CX-5_8FN1-EA-16L_Edition1.indb 42

2016/12/12 10:07:29

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands