Mazda CX-52017, Owner'S Manual

Page: 197 / 664

4–53
When Driving
Switches and Controls
*Some models.
Auto-light control
*
When the headlight switch is in the position and the ignition is switched ON, the light
sensor senses the surrounding lightness or darkness and automatically turns the headlights
and other exterior lights on or off.
CAUTION
      Do not shade the light sensor by adhering a sticker or a label on the windshield. Otherwise
the light sensor will not operate correctly.
      The light sensor also works as a rain sensor for the auto-wiper control. Keep hands and
scrapers clear of the windshield when the wiper lever is in the position and the
ignition is switched ON as fi ngers could be pinched or the wipers and wiper blades could be
damaged when the wipers activate automatically. If you are going to clean the windshield,
be sure the wipers are turned off completely when it is particularly tempting to leave the
engine running. This is particularly important when clearing ice and snow.
NOTE
     
The headlights and other exterior lights may not turn off immediately even if the
surrounding area becomes well-lit because the light sensor determines that it is night
time if the surrounding area is continuously dark for several minutes such as inside long
tunnels, traf
fi
c jams inside tunnels, or in indoor parking lots.
 
In this case, the lights turn off if the light switch is turned to the position.
     
If the headlight switch and the windshield wiper switch are in , and the wipers are
operated at low or high speed by the auto wiper control for several seconds, bad weather
conditions are determined and the headlights may be turned on.
     
The sensitivity of the auto-light control may be changed.
 
Refer to Personalization Features on page 9-11 .
CX-5_8FN1-EA-16L_Edition1.indb 53 2016/12/12 10:05:54