Mazda CX-52017 Owner'S Manual Download Page 283

Page: 283 / 664

4–139

When Driving

i-ACTIVSENSE

System Operation

Make sure that the Lane-keep Assist

System (LAS) & Lane Departure Warning

System (LDWS) OFF indicator light in

the instrument cluster is turned off. When

the Lane-keep Assist System (LAS) &

Lane Departure Warning System (LDWS)

OFF indicator light is turned on, press the

switch and make sure that the indicator

light turns off.

The Lane-keep Assist System (LAS) &

Lane Departure Warning System (LDWS)

indication (white) is displayed in the

multi-information display, and the system

goes on stand-by.

(White)

Drive the vehicle in the center of the

vehicle lane while the system is on

standby. When all of the following

conditions are met, the Lane-keep Assist

System (LAS) & Lane Departure Warning

System (LDWS) indication (green) is

displayed in the multi-information display,

and the system becomes operational.

(Green)







The engine is running.







The vehicle speed is about 60 km/h

(37 mph) or faster.







The system detects white (yellow) lane

lines on both the right and left sides.







The driver is operating the steering

wheel.







The driving lane is neither narrow nor

wide.

NOTE

The Lane-keep Assist System (LAS) &

Lane Departure Warning System (LDWS)

indication is white when the system detects

only a white (yellow) line on either the

left or right, and the indication changes

to green when the system detects white

(yellow) lines on both the left and right

sides.

Detection only on

either left or right

Detects on both

left and right sides

(White)

(Green)

CX-5_8FN1-EA-16L_Edition1.indb 139

2016/12/12 10:06:14

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands