Mazda CX-52017 Owner'S Manual Download Page 373

Page: 373 / 664

5–45

Interior Features

Audio Set [Type A (non-touchscreen)]

NOTE







If pairing cannot be completed, try

“1234” instead. Refer to the owner's

manual of your mobile device for the

right PIN code.







Some Bluetooth

audio devices need a

certain amount of time before the

symbol is displayed.







If the pairing failed, “ Err ”

ashes for

three seconds.







Pairing cannot be performed while

the vehicle is moving. If you attempt

to perform pairing while the vehicle is

moving, “ PAIR DISABLE ” is displayed.







If seven Bluetooth

audio devices have

already been paired to the vehicle,

pairing cannot be performed and

“ MEMORY FULL ” is displayed. Delete

one paired device to pair another one.

Device selection (Bluetooth

Audio)

If several devices have been paired, the

Bluetooth

unit links the device last

paired. If you would like to link a different

paired device, it is necessary to change the

link. The order of device priority after the

link has been changed is maintained even

when the ignition is switched off.

1. Using the audio control dial, select the

link change mode “ LINK CHANGE ”

in the “ BT SETUP ” mode. (Refer to

“Bluetooth

audio device set-up” for

details.)

2. Press the audio control dial to

determine the mode.

3. The name of the currently linked

Bluetooth

audio device is displayed.

If no Bluetooth

audio device is

currently linked, the name of the

rst

device among the paired devices is

displayed.

4. Turn the audio control dial to select the

name of the device you would like to

link.

Device name 1

Device name 2

Device name 3

Device name 4

Device name 5

Device name 6

Device name 7

5. Press the audio control dial to select the

device you would like to link. The

symbol disappears, and “ PAIRING ”

ashes in the audio display.

NOTE

When “ GO BACK ” is selected and the

audio control dial is pressed, the display

returns to “ LINK CHANGE ”.

6. If the link to the desired device is

successful, the symbol is displayed

again, together with “ LINK

CHANGED ”. “ LINK CHANGED ” is

displayed for three seconds, then it

returns to the normal display.

CX-5_8FN1-EA-16L_Edition1.indb 45

2016/12/12 10:06:33

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands