Mazda CX-52017 Owner'S Manual Download Page 526

Page: 526 / 664

6–50

Maintenance and Care

Owner Maintenance

Fuses

Your vehicle's electrical system is

protected by fuses.

If any lights, accessories, or controls do

not work, inspect the appropriate circuit

protector. If a fuse has blown, the inside

element will be melted.

If the same fuse blows again, avoid using

that system and consult an Authorized

Mazda Dealer as soon as possible.

Fuse Replacement

Replacing the fuses on the vehicle's left

side

If the electrical system does not work,

rst

inspect the fuses on the vehicle's left side.

1. Make sure the ignition is switched off,

and other switches are off.

2. Open the fuse panel cover.

3. Pull the fuse straight out with the

fuse puller provided on the fuse block

located in the engine compartment.

4. Inspect the fuse and replace it if it is

blown.

Normal

Blown

5. Insert a new fuse of the same amperage

rating, and make sure it

ts tightly. If

it does not

t tightly, have an expert

install it. We recommend an Authorized

Mazda Dealer.

If you have no spare fuses, borrow one

of the same rating from a circuit not

essential to vehicle operation, such as

the AUDIO or OUTLET circuit.

CAUTION

Always replace a fuse with a genuine
Mazda fuse or equivalent of the same
rating. Otherwise you may damage
the electric system.

CX-5_8FN1-EA-16L_Edition1.indb 50

2016/12/12 10:07:15

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands