Mazda CX-52017, Owner'S Manual

Page: 204 / 664

4–60
When Driving
Switches and Controls
Auto-wiper control
When the wiper lever is in the
position, the rain sensor senses the amount
of rainfall on the windshield and turns the
wipers on or off automatically (off—
intermittent—low speed—high speed).
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the center position (normal), rotate
the switch upward for higher sensitivity
(faster response) or rotate it downward for
less sensitivity (slower response).
Higher sensitivity
Less sensitivity
Switch
Center
position
CAUTION
      Do not shade the rain sensor by
adhering a sticker or a label on the
windshield. Otherwise the rain sensor
will not operate correctly.
      When the wiper lever is in the
position and the ignition is switched ON,
the wipers may move automatically in
the following cases:
      If the windshield above the rain
sensor is touched or wiped with a
cloth.
     
If the windshield is struck with a hand
or other object from either outside or
inside the vehicle.
 
Keep hands and scrapers clear of the
windshield when the wiper lever is in the
position and the ignition is
switched ON as fi ngers could be pinched
or the wipers and wiper blades damaged
when the wipers activate automatically.
  If you are going to clean the windshield,
be sure the wipers are turned off
completely (when it is most likely
that the engine is left running) this is
particularly important when clearing ice
and snow.
CX-5_8FN1-EA-16L_Edition1.indb 60 2016/12/12 10:05:57