Mazda CX-52017 Owner'S Manual Download Page 525

Page: 525 / 664

6–49

Maintenance and Care

Owner Maintenance

Luggage compartment light

1. Wrap a small

athead screwdriver

with a soft cloth to prevent damage to

the lens and remove the lens unit by

carefully prying on the edge of the lens

unit with the

athead screwdriver.

2. Disconnect the electrical connector

from the bulb by pressing the tab on the

connector with your

nger and pulling

the connector.

CAUTION

When replacing the bulb always
disconnect the connector fi rst.
Otherwise, electric and electronic
devices could be shorted.

3. Insert the

athead screwdriver into the

gap between the lens and the lens unit,

and then slide the screwdriver to detach

the lens.

4. Disconnect the bulb by pulling it out.

5. Install the new bulb in the reverse order

of the removal procedure.

CX-5_8FN1-EA-16L_Edition1.indb 49

2016/12/12 10:07:15

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands