Mazda CX-52017 Owner'S Manual Download Page 614

Page: 614 / 664

8–26

Customer Information and Reporting Safety Defects

Tire Information (U.S.A.)

Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated

by the Tire and Rim Association (T&RA).

NOTE

If your tire size does not begin with a letter this may mean it is designated by either ETRTO

(European Tire and Rim Technical Organization) or JATMA (Japan Tire Manufacturing

Association).

215

“215” is the nominal width of the tire in millimeters. This three-digit number gives the

width in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger

the number, the wider the tire.

“65” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.

“R” is the tire construction symbol. R indicates “Radial ply construction”.

“15” is the wheel rim diameter in inches.

“95” is the Load Index. This two-or three-digit number indicates how much weight each tire

can support.

“H” is the speed rating. The speed rating denotes the maximum speed for which the use of

the tire is rated.

Letter Rating

Speed Rating

99 mph

106 mph

112 mph

118 mph

124 mph

130 mph

149 mph

168

mph

186

mph

For tires with a maximum speed capability over 149 mph, tire manufacturers sometimes use the letters ZR. For

tires with a maximum speed capability over 186 mph, tire manufacturers always use the letters ZR.

CX-5_8FN1-EA-16L_Edition1.indb 26

2016/12/12 10:07:33

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands