Mazda CX-52017 Owner'S Manual Download Page 46 | Manualshive

Page: 46 / 664

background image

2–32

Essential Safety Equipment

Child Restraint

Do not allow a child or anyone to lean over or against the side window of a vehicle with
side and curtain air bags:

It is dangerous to allow anyone to lean over or against the side window, the area of the
front passenger seat, the front and rear window pillars and the roof edge along both
sides from which the side and curtain air bags deploy, even if a child-restraint system
is used. The impact of infl ation from a side or curtain air bag could cause serious injury
or death to an out of position child. Furthermore, leaning over or against the front door
could block the side and curtain air bags and eliminate the advantages of supplemental
protection. With the front air bag and the additional side air bag that comes out of the
front seat, the rear seat is always a better location for children. Take special care not to
allow a child to lean over or against the side window, even if the child is seated in a child-
restraint system.

Never use one seat belt on more than one person at a time:

Using one seat belt for more than one person at a time is dangerous. A seat belt used
in this way cannot spread the impact forces properly and the two passengers could
be crushed together and seriously injured or even killed. Never use one belt for more
than one person at a time and always operate the vehicle with each occupant properly
restrained.

Always remove the child-restraint system from the rear seat before operating the
remote handle for the rear seat:

Operating the remote handle while a rear-facing child-restraint system is in the rear seat
is dangerous. It could cause injury to a child seated in the child-restraint system when the
seatback suddenly fl ips forward.

CAUTION

A seat belt or child-restraint system can become very hot in a closed vehicle during warm
weather. To avoid burning yourself or a child, check them before you or your child touches
them.

NOTE

Your Mazda is equipped with LATCH lower anchors for attachment of specially designed

LATCH child-restraint systems in the rear seats. When using these anchors to secure a

child-restraint system, refer to "Using LATCH Lower Anchor" (page 2-42 ).

CX-5_8FN1-EA-16L_Edition1.indb 32

2016/12/12 10:05:20

«
...
44
45
46
47
48
...
»

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-52017

Indigo MANZA QUADRAJET 90

Brand: TATA Motors Pages: 10

autoSteady AS101

Brand: Enduro Pages: 48

Brand: Harman Kardon Pages: 16

Brand: TATA Motors Pages: 184

PW-50C Civilian

Brand: B&G electronics Pages: 7

Brand: EUFAB Pages: 12

Brand: E&G Classics Pages: 3

Brand: SNIPER Pages: 2

Brand: Thule Pages: 4

INDICA eV2 XETA CNG

Brand: TATA Motors Pages: 24

Brand: PAC Pages: 5

Brand: Percon Pages: 49

Bluetooth Kit3 PLUS

Brand: N-Com Pages: 36

Dynamic Power Management Home - Module

Brand: newmotion Pages: 20

Brand: Yakima Pages: 28

Brand: Rigid Hitch Pages: 2

Brand: Pogo Pages: 40

Brand: Prime Design Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands