Mazda CX-52017 Owner'S Manual Download Page 153

Page: 153 / 664

4–9

When Driving

Start/Stop Engine

If the engine cannot be started due to a

dead key battery, the engine can be started

using the following procedure:

1. Continue to depress the brake pedal

rmly until the engine has completely

started.

(Manual transaxle)

Continue to depress the clutch pedal

rmly until the engine has completely

started.

3. Verify that the push button start

indication light (green)

ashes.

4. Touch the push button start using the

backside of the key (as shown) while

the push button start indicator light

(green)

ashes.

Push button start

Indicator light

Key

NOTE

When touching the push button start using

the backside of the key as shown in the

illustration, touch the push button start

with the lock switch side of the key facing

up.

5. Verify that the push button start

indicator light (green) turns on.

6. Press the push button start to start the

engine.

NOTE







The engine cannot be started unless the

clutch pedal is fully depressed (manual

transaxle) or the brake pedal is fully

depressed (automatic transaxle).







If there is a malfunction with the push

button start function, the push button

start indicator light (amber)

ashes.

In this case, the engine may start,

however, have the vehicle checked at an

Authorized Mazda Dealer as soon as

possible.







If the push button start indicator light

(green) does not illuminate, perform the

operation from the beginning again. If

it does not illuminate, have the vehicle

checked at an Authorized Mazda Dealer.







To switch the ignition position without

starting the engine, perform the

following operations after the push

button start indicator light (green) turns

on.

1. Release the clutch pedal (manual

transaxle) or brake pedal (automatic

transaxle).

2. Press the push button start to switch

the ignition position. The ignition

switches in the order of ACC, ON,

and off each time the push button

start is pressed. To switch the

ignition position again, perform the

operation from the beginning.

CX-5_8FN1-EA-16L_Edition1.indb 9

2016/12/12 10:05:41

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands