Mazda CX-52017 Owner'S Manual Download Page 574

Page: 574 / 664

7–32

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Signal

Warning

Action to be taken

(Amber)

Smart Brake Support/

Smart City Brake

Support (SBS/SCBS)

Warning Indication/

Warning Light

The light turns on if the windshield or

the radar sensor are dirty, or there is a

malfunction in the system.

Verify the reason why the warning light is

illuminated on the center display.

If the reason why the warning light is

illuminated is due to a dirty windshield,

clean the windshield.

If the warning light is illuminated because

of a dirty radar sensor, clean the front

emblem.

For any other reasons, have the vehicle

inspected at an Authorized Mazda Dealer.

Low Fuel Warning

Indication/Warning Light

The light turns on when the remaining fuel

is about 9.0 L (2.3 US gal, 1.9 Imp gal).

NOTE

The light illumination timing may

vary because fuel inside the fuel tank

moves around according to the driving

conditions and the vehicle posture.

Add fuel.

Check Fuel Cap Warning

Indication/Warning Light

If the check fuel cap warning light

illuminates while driving, the fuel-

ller

cap may not be installed properly.

Stop the engine and reinstall the fuel-

ller

cap.

Refer to Fuel-Filler Cap on page 3-34

CX-5_8FN1-EA-16L_Edition1.indb 32

2016/12/12 10:07:27

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands