manualshive.com logo in svg

Mazda CX-52017, Owner'S Manual, Page: 547 / 664

Share
Download
Mazda CX-52017 Owner'S Manual Download Page 547

7–5

If Trouble Arises

Flat Tire

  

CAUTION

 



  When using the temporary spare tire, 

driving stability may decrease compared 
to when using only the conventional tire. 
Drive carefully.



  To avoid damage to the temporary 

spare tire or to the vehicle, observe the 
following precautions:

  



  Do not exceed 80 km/h (50 mph).



  Avoid driving over obstacles. Also, do 

not drive through an automatic car 
wash. This tire's diameter is smaller 
than a conventional tire, so the 
ground clearance is reduced.



  Do not use a tire chain on this tire 

because it will not fi t properly.



  Do not use your temporary spare 

tire on any other vehicle, it has been 
designed only for your Mazda.



  Use only one temporary spare tire on 

your vehicle at the same time.

    

     

  To remove the spare tire

     1.   Open  the  luggage  board,  and  remove  it.

   

 

 

   2.   For vehicles equipped with a sub-

woofer, uncouple the connector.

   

 

Connector

 

   NOTE

  Extra strength may be required to 

uncouple the connector. Be sure to squeeze 

the tab 

fi

 rmly.

   

CX-5_8FN1-EA-16L_Edition1.indb   5

2016/12/12   10:07:19

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments