Mazda CX-52017 Owner'S Manual Download Page 37

Page: 37 / 664

2–23

Essential Safety Equipment

Seat Belt Systems

Seat Belt

Fastening the Seat Belt

Seat belt

buckle

Seat belt tongue

Position the lap belt as low as possible,

not on the abdominal area, then adjust the

shoulder belt so that it

ts snugly against

your body.

Keep low
on hip bone

Too high

Take up
slack

Unfastening the Seat Belt

Depress the button on the seat belt buckle.

If the belt does not fully retract, pull it out

and check for kinks or twists. Then make

sure it remains untwisted as it retracts.

Button

NOTE

If a belt does not fully retract, inspect

it for kinks and twists. If it is still not

retracting properly, have it inspected at an

Authorized Mazda Dealer.

Front Shoulder Belt Adjuster

To raise

To lower

Make sure the adjuster is locked.

CX-5_8FN1-EA-16L_Edition1.indb 23

2016/12/12 10:05:19

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands