Mazda CX-52017 Owner'S Manual Download Page 106

Page: 106 / 664

3–26

Before Driving

Doors and Locks

Operation using the transmitter

Press the power liftgate button for one

second or more. The hazard warning lights

ash twice and the liftgate opens/closes

after the beep sounds.

Refer to Transmitter on page 3-5 .

NOTE







When the ignition is switched ON, the

transmitter does not operate.







When opening the liftgate by pressing

the power liftgate button on the

transmitter, the liftgate can be opened

even when it is locked.







If the power liftgate button on the

transmitter is pressed while the liftgate

is opening/closing electrically, the

beep is activated and the liftgate stops.

When pressing the power liftgate button

again, the liftgate moves in the reverse

direction.

Operation using each switch

Operation conditions

Opening the liftgate

If the vehicle has satis

ed all the following

operation conditions, the power liftgate

can be opened using the power function.







All doors and the liftgate are unlocked.







The ignition is switched OFF, or the

selector lever is in P with the ignition

switched ON.

Closing the liftgate







The ignition is switched OFF, or the

selector lever is in P with the ignition

switched ON.

NOTE

If the vehicle moves with the selector lever

shifted to a position other than P while the

liftgate is opening/closing electrically, the

liftgate moves as follows:

While opening electrically

The buzzer is activated, and the

liftgate moves in the reverse direction

automatically and closes. When the

selector lever is shifted to P, you can

resume the power liftgate operation using

the switches.

While closing electrically

The buzzer is activated, but the liftgate

continues closing.

Operation from the driver's seat (To

open/close)

Press the power liftgate switch for about

one second or more while the liftgate is in

the fully closed/open position. The hazard

warning lights

ash twice and the liftgate

opens/closes fully after the beep sound is

heard.

Power liftgate switch

CX-5_8FN1-EA-16L_Edition1.indb 26

2016/12/12 10:05:32

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands