Mazda CX-52017 Owner'S Manual Download Page 336

Page: 336 / 664

5–8

Interior Features

Climate Control System

Air intake selector

This switch controls the source of air

entering the vehicle.

Outside or recirculated air positions can be

selected. Press the switch to select outside/

recirculated air positions.

Recirculated air position (indicator light

illuminated)

Outside air is shut off. Use this position

when going through tunnels, driving in

congested traf

c (high engine exhaust

areas) or when quick cooling is desired.

Outside air position (indicator light

turned off)

Outside air is allowed to enter the

cabin. Use this mode for ventilation or

windshield defrosting.

WARNING

Do not use the

position in cold or

rainy weather:

Using the

position in cold or rainy

weather is dangerous as it will cause
the windows to fog up. Your vision will
be hampered, which could lead to a
serious accident.

Rear window defogger switch

Press the rear window defogger switch to

defrost the rear window.

Refer to Rear Window Defogger on page

4-62 .

Heating

1. Set the mode selector dial to the

position.

2. Set the air intake selector to the outside

air position (indicator light turns off).

3. Set the temperature control dial to the

hot position.

4. Set the fan control dial to the desired

speed.

5. If dehumidi

ed heating is desired, turn

on the air conditioner.

NOTE







If the windshield fogs up easily, set the

mode selector dial to the position.







If cooler air is desired at face level, set

the mode selector dial at the position

and adjust the temperature control dial

to maintain maximum comfort.







The air to the

oor is warmer than air

to the face (except when the temperature

control dial is set at the extreme hot or

cold position).

Cooling

1. Set the mode selector dial to the

position.

2. Set the temperature control dial to the

cold position.

3. Set the fan control dial to the desired

speed.

4. Turn on the air conditioner by pressing

the A/C switch.

5. After cooling begins, adjust the fan

control dial and temperature control

dial as needed to maintain maximum

comfort.

CX-5_8FN1-EA-16L_Edition1.indb 8

2016/12/12 10:06:23

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands