Mazda CX-52017 Owner'S Manual Download Page 617

Page: 617 / 664

8–29

Customer Information and Reporting Safety Defects

Tire Information (U.S.A.)

Indicates a tire that may be installed on cars, SUVs, minivans and light trucks as designated

by the Tire and Rim Association (T&RA).

115

“115” is the nominal width of the tire in millimeters. This three-digit number gives the width

in millimeters of the tire from sidewall edge to sidewall edge. In general, the larger the

number, the wider the tire.

“70” is the aspect ratio. This two-digit number indicates the tire's ratio of height to width.

“D” is the tire construction symbol. D indicates “diagonal ply construction”.

“16” is the wheel rim diameter in inches.

“90” is the Load Index. This two-or three-digit number indicates how much weight each tire

can support.

“M” is the speed rating. The speed rating denotes the maximum speed for which the use of

the tire is rated.

Letter Rating

Speed Rating

81 mph

CX-5_8FN1-EA-16L_Edition1.indb 29

2016/12/12 10:07:33

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands