Mazda CX-52017 Owner'S Manual Download Page 422

Page: 422 / 664

5–94

Interior Features

Audio Set [Type B (touchscreen)]

Bluetooth

Preparation

Device pairing

To use Bluetooth

audio and Hands-Free,

the device equipped with Bluetooth

has

to be paired to the unit using the following

procedure. A maximum of seven devices

including Bluetooth

audio devices and

hands-free mobile phones can be paired.

NOTE







The Bluetooth

system may not operate

for 1 or 2 minutes after the ignition

is switched to ACC or ON. However,

this does not indicate a problem. If the

Bluetooth

system does not connect

automatically after 1 or 2 minutes have

elapsed, make sure that the Bluetooth

setting on the device is normal and

attempt to reconnect the Bluetooth

device from the vehicle side.







If Bluetooth

-enabled devices are used

in the following locations or conditions,

connection via Bluetooth

may not be

possible.







The device is in a location hidden

from the center display such as

behind or under a seat, or inside the

glove compartment.







The device contacts or is covered by

a metal object or body.







The device is set to power-saving

mode.

Pairing Procedure

1. Select the icon on the home screen

to display the Settings screen.

2. Select the

tab.

3. Select

4. Turn the Bluetooth

setting on.

5. Select

to display the

message and switch to the device

operation.

6. Using your device, perform a search

for the Bluetooth

device (Peripheral

device).

7. Select “Mazda” from the device list

searched by the device.

(Device with Bluetooth

version 2.0)

Input the displayed 4-digit pairing code

into the device.

(Device with Bluetooth

version 2.1

or higher)

Make sure the displayed 6-digit code

on the audio is also displayed on the

device, and touch the .

Connection permission and phonebook

access permission for your mobile

device may be required depending on

the mobile device.

9. If pairing is successful, the functions of

the device connected to Bluetooth

are

displayed.

10.

(Devices compatible with Mazda

E-mail / SMS function)

SMS (Short Message Service)

messages, and E-mail for the device are

downloaded automatically. A download

permission operation for your device

may be required depending on the

device.

CX-5_8FN1-EA-16L_Edition1.indb 94

2016/12/12 10:06:46

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands