background image

4–136

When Driving

i-ACTIVSENSE

  

WARNING

 

  Do not rely completely on the Lane-keep Assist System (LAS) & Lane Departure 
Warning System (LDWS):

  



  The Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) is not an 

automatic driving system. In addition, the system is not designed to compensate for a 
driver's lack of caution, and over-reliance on the system could lead to an accident.



  The detection ability of the Lane-keep Assist System (LAS) & Lane Departure Warning 

System (LDWS) is limited. Always stay on course using the steering wheel and drive 
with care.

    

  Do not use the Lane-keep Assist System (LAS) & Lane Departure Warning System 
(LDWS) in the following cases:

  The system may not operate adequately according to the actual driving conditions, 
resulting in an accident.

  



  Driving on roads with tight curves.



  Driving under bad weather conditions (rain, fog, and snow).



  Slippery roads such as ice or snow-bound roads.



  Roads with heavy traffi

  c and insuffi

  cient distance between vehicles.



  Roads with no white (yellow) lane lines.



  Narrow roads resulting from road construction or lane closures.



  The vehicle is driven on a temporary lane or section with a closed lane resulting from 

road construction where there may be multiple white (yellow) lane lines or they are 
interrupted.



  The tire pressures are not adjusted to the specifi ed pressure.



  Tires of a diff erent specifi ed size are used, such as an emergency spare tire.

     

  

CAUTION

 

  Heed the following cautions so that the Lane-keep Assist System (LAS) & Lane Departure 
Warning System (LDWS) can operate normally.

  



  Do not modify the suspensions.



  Always use wheels of the specifi ed type and size for the front and rear wheels. Consult 

an Authorized Mazda Dealer for tire replacement.

     

CX-5_8FN1-EA-16L_Edition1.indb   136

2016/12/12   10:06:13

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Reviews: