Mazda CX-52017 Owner'S Manual Download Page 269

Page: 269 / 664

4–125

When Driving

i-ACTIVSENSE

If there is a problem with the Mazda Radar Cruise Control with Stop & Go function (MRCC

with Stop & Go function) system, a message is displayed on the multi-information display.

Check the center display to verify the problem and then have your vehicle inspected by an

Authorized Mazda Dealer.

Refer to Message Indicated on Display on page 7-37 .

Close Proximity Warning

If your vehicle rapidly closes in on the vehicle ahead because the vehicle ahead applies

the brakes suddenly while you are traveling in headway control, the warning sound

activates and the brake warning is indicated in the display. Always verify the safety of

the surrounding area and depress the brake pedal while keeping a safer distance from the

vehicle ahead. Additionally, keep a safer distance from the vehicles behind you.

Multi-information Display

Active Driving Display

NOTE

In the following cases, the warnings and brakes may not operate even if your vehicle starts

closing in on the vehicle ahead.







You are driving your vehicle at the same speed as the vehicle ahead.







Directly after the Mazda Radar Cruise Control with Stop & Go function (MRCC with

Stop & Go function) system has been set.







Directly after the accelerator pedal is released.







Another vehicle cuts into the driving lane.

CX-5_8FN1-EA-16L_Edition1.indb 125

2016/12/12 10:06:10

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands