Mazda CX-52017 Owner'S Manual Download Page 568

Page: 568 / 664

7–26

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Contact Authorized Mazda Dealer and Have Vehicle Inspected

If any of the following warning lights or the indicator light turns on/

ashes, the system may

have a malfunction. Contact an Authorized Mazda Dealer to have your vehicle inspected.

Signal

Warning

ABS Warning Light

If the ABS warning light stays on while you're driving, the ABS control unit has detected a

system malfunction. If this occurs, your brakes will function normally as if the vehicle had

no ABS.

Should this happen, consult an Authorized Mazda Dealer as soon as possible.

NOTE



When the engine is jump-started to charge the battery, uneven rpm occurs and the ABS

warning light may illuminate. If this occurs, it is the result of the weak battery and does

not indicate an ABS malfunction.

Recharge the battery.



The brake assist system does not operate while the ABS warning light is illuminated.

Master Warning

Indication/Warning

Light

With Multi-information Display

Displays when noti

cation of the system malfunctions is required.

Check the message indicated in the display and consult an Authorized Mazda Dealer.

Master

warning

light

Indication in display and master warning light in instrument cluster are illuminated at same

time.

This indicates a malfunction with the vehicle system. Check the message indicated in the

display and consult an Authorized Mazda Dealer.

For details, refer to the explanations for the warning/indicator lights, in the warning/

indicator lights section, which match the symbol in the upper part of the display.

If a message is not indicated in the display, operate the INFO switch to display the

“Warning” screen.

Refer to Message Indicated in Multi-information Display and INFO Switch on page 4-20 .

Without Multi-information Display

The light illuminates continuously if any one of the following occurs. Consult an

Authorized Mazda Dealer.



There is a malfunction in the battery management system.



There is a malfunction in the brake switch.

Electric Parking

Brake (EPB)

Warning Indication/

Warning Light

The warning light illuminates when the system has a malfunction. Have your vehicle

inspected at an Authorized Mazda Dealer.

CX-5_8FN1-EA-16L_Edition1.indb 26

2016/12/12 10:07:25

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands