Mazda CX-52017 Owner'S Manual Download Page 274

Page: 274 / 664

4–130

When Driving

i-ACTIVSENSE

How to change the set vehicle speed

To accelerate/decelerate using the SET

switch

When you press the SET switch, the

vehicle accelerates and when you press the

SET switch, it decelerates.

Short press

1 km/h (1 mph)

Long press

10 km/h (5 mph)

NOTE

For example, the set vehicle speed is

changed by pressing the SET switch four

times as follows:

The vehicle speed accelerates or

decelerates by 4 km/h (4 mph).

To increase speed using accelerator

pedal

Depress the accelerator pedal and press

and release the SET switch or SET

switch at the desired speed. If the switch is

not operated, the system returns to the set

speed after you release your foot from the

accelerator pedal.

CAUTION

The warnings and brake control do not
operate while the accelerator pedal is
depressed.

NOTE







The setting speed can be changed by

operating the SET switch or SET

switch during stop hold control.







When accelerating using the SET

switch while in headway control, the set

vehicle speed can be adjusted but

acceleration is not possible. If there is

no longer a vehicle ahead, acceleration

continues until reaching the set vehicle

speed. For the set vehicle speed, check

the set vehicle speed indication in the

display.







When depressing the accelerator pedal,

the inter-vehicle distance indication in

the display changes to the white-line

indication.

Canceling the system

When the following operations are

performed, the Mazda Radar Cruise

Control with Stop & Go function (MRCC

with Stop & Go function) system is

canceled, and the Mazda Radar Cruise

Control with Stop & Go function (MRCC

with Stop & Go function) set indicator

(green) switches to the Mazda Radar

Cruise Control with Stop & Go function

(MRCC with Stop & Go function) main

indicator (white) at the same time.







The OFF/CAN switch is pressed.







The brake pedal is depressed.







The electric parking brake (EPB) is

applied.







The selector lever is in the P (Park), N

(Neutral), or R (Reverse) position.







Any of the doors is opened.







The driver's seat belt is unfastened.

CX-5_8FN1-EA-16L_Edition1.indb 130

2016/12/12 10:06:12

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands