Mazda CX-52017 Owner'S Manual Download Page 501 | Manualshive

Page: 501 / 664

background image

6–25

Maintenance and Care

Owner Maintenance

Inspecting Engine Oil Level

1. Be sure the vehicle is on a level

surface.

2. Warm up the engine to normal

operating temperature.

3. Turn it off and wait at least 5 minutes

for the oil to return to the oil pan.

4. Pull out the dipstick, wipe it clean, and

reinsert it fully.

MAX

OK

MIN

5. Pull it out again and examine the level.

The level is normal if it is between the

MIN and MAX marks.

If it is near or below MIN, add enough

oil to bring the level to MAX.

CAUTION

Do not overfi ll the engine oil. This may
cause engine damage.

6. Make sure the O-ring on the dipstick is

positioned properly before reinserting

the dipstick.

7. Reinsert the dipstick fully.

Engine Coolant

Inspecting Coolant Level

WARNING

Do not use a match or live fl ame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS HOT:

A hot engine is dangerous. If the
engine has been running, parts of the
engine compartment can become very
hot. You could be burned. Carefully
inspect the engine coolant in the
coolant reservoir, but do not open it.

Pull over to a safe location, then

switch the ignition off and make sure
the fan is not running before attempting
to work near the cooling fan:

Working near the cooling fan when it
is running is dangerous. The fan could
continue running indefi nitely even if
the engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.

Do not remove either cooling

system cap when the engine and
radiator are hot:

When the engine and radiator are hot,
scalding coolant and steam may shoot
out under pressure and cause serious
injury.

NOTE

Changing the coolant should be done by

an Authorized Mazda Dealer.

CX-5_8FN1-EA-16L_Edition1.indb 25

2016/12/12 10:07:08

«
...
499
500
501
502
503
...
»

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-52017

Brand: Jeep Pages: 42

Brand: Jeep Pages: 44

Brand: Cadillac Pages: 20

Brand: Jeep Pages: 7

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 354

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 10

2013 Escalade ESV

Brand: Cadillac Pages: 524

Brand: Cadillac Pages: 20

Brand: Cadillac Pages: 438

Brand: Cadillac Pages: 450

2011 Escalade Hybrid

Brand: Cadillac Pages: 94

2011 Escalade Hybrid

Brand: Cadillac Pages: 94

Brand: Cadillac Pages: 78

Brand: Cadillac Pages: 8

Brand: Cadillac Pages: 113

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands