Mazda CX-52017, Owner'S Manual

Page: 22 / 664

2–8
Essential Safety Equipment
Seats
*Some models.
CAUTION
Do not use organic solvents to clean
the seat. It may damage the seat
surface and the heater.
NOTE
     
If the ignition is switched off while the
seat warmer is operating (High, Mid or
Low) and then switched ON again, the
seat warmer will automatically operate
at the temperature set before switching
off the ignition.
     
Use the seat warmer when the engine
is running. Leaving the seat warmer
on for long periods with the engine not
running could cause the battery power
to be depleted.
     
The temperature of the seat warmer
cannot be adjusted beyond High, Mid
and Low because the seat warmer is
controlled by a thermostat.
Driving Position Memory
*
The desired driving position can be called
up after programming the position.
The following driving positions can be
programmed.
     
Driver’s seat position (seat slide, height
adjustment, front edge of seat bottom,
seat recline)
 
Refer to Seat Operation on page 2-5 .
     
Active driving display (display position,
brightness level, display information)
 
Refer to Active Driving Display on page
4-28 .
CAUTION
Do not place fi ngers or hands around
the bottom of the seat while the seat
memory function is operating. The
seat moves automatically while the
seat memory function is operating and
fi ngers or hands could get pinched and
injured.
SET button
1
2
The driving position can be programmed
or operated using the buttons on the side
of the seat or the key.
NOTE
     
Lumbar support adjustment cannot be
programmed.
     
Individual seat positions can be
programmed to the two available
programming buttons on the side of the
driver's seat, plus one seat position for
each registered key.
     
If the vehicle has been serviced and
the battery cables disconnected, the
programmed seat positions will have
been erased. Re-program the seat
positions.
CX-5_8FN1-EA-16L_Edition1.indb 8 2016/12/12 10:05:15