Mazda CX-52017 Owner'S Manual Download Page 349

Page: 349 / 664

5–21

Interior Features

Audio Set [Type A (non-touchscreen)]

NOTE

If not operated for several seconds, the

display returns to the previous display. To

reset bass, treble, fade, and balance, press

the menu button (

) for 2 seconds.

The unit will beep and “ CLEAR ” will be

displayed.

ALC (Automatic volume adjustment)

The automatic level control (ALC)

changes the audio volume automatically

according to the vehicle speed. The faster

the vehicle speed, the higher the volume

increases. ALC has ALC OFF and ALC

LEVEL 1 to 7 modes. At ALC LEVEL 7,

the amount that the volume can increase

is at the maximum. Select the mode

according to the driving conditions.

BEEP (Audio operation sound)

The setting for the operation sound when

pressing and holding a button can be

changed. The initial setting is ON. Set to

OFF to mute the operation sound.

BT SETUP mode

Music and other audio such as voice data

recorded on portable audio devices and

mobile phones available on the market

which are equipped with the Bluetooth

transmission function can be listened to

via wireless transmission over the vehicle's

speakers. Using the BT SETUP mode,

these devices can be programmed to the

Bluetooth

unit or changed (page 5-38 ).

12Hr

24Hr (12 Hr/24 Hr time

adjustment)

Rotating the audio control dial switches

the display between 12 and 24-hour clock

time (page 5-22 ).

CX-5_8FN1-EA-16L_Edition1.indb 21

2016/12/12 10:06:28

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands