Mazda CX-52017 Owner'S Manual Download Page 316

Page: 316 / 664

4–172

When Driving

Tire Pressure Monitoring System

*Some models.

Tire Pressure Monitoring System

The Tire Pressure Monitoring System (TPMS) monitors the pressure for each tire.

If tire pressure is too low in one or more tires, the system will inform the driver via the

warning light in the instrument cluster and by the warning beep sound.

Refer to Warning Indication/Warning Lights on page 4-33 .

Refer to Tire In

ation Pressure Warning Beep on page 7-42 .

The tire pressure sensors installed on each wheel send tire pressure data by radio signal to

the receiver unit in the vehicle.

Tire pressure sensors

NOTE

When the ambient temperature is low due to seasonal changes, tire temperatures are also

lower. When the tire temperature decreases, the air pressure decreases as well. The TPMS

warning light may illuminate more frequently. Visually inspect the tires daily before driving,

and check tire pressures monthly with a tire pressure gauge. When checking tire pressures,

use of a digital tire pressure gauge is recommended.

TPMS does not alleviate your need to check the pressure and condition of all four tires

regularly.

CX-5_8FN1-EA-16L_Edition1.indb 172

2016/12/12 10:06:19

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands