Mazda CX-52017 Owner'S Manual Download Page 628 | Manualshive

Page: 628 / 664

background image

8–40

Customer Information and Reporting Safety Defects

Tire Information (U.S.A.)

GCW (Gross Combination Weight)

is the weight of the loaded vehicle (GVW) plus the

weight of the fully loaded trailer.

GCWR (Gross Combination Weight Rating)

is the maximum allowable weight of the

vehicle and the loaded trailer - including all cargo and passengers - that the vehicle can

handle without risking damage. (Important: The towing vehicle's braking system is rated

for operation at GVWR, not at GCWR. Separate functional brakes should be used for safe

control of towed vehicles and for trailers weighing more than 1,500 lbs).

The GCW must

never exceed the GCWR.

Maximum Loaded Trailer Weight

is the highest possible weight of a fully loaded trailer

the vehicle can tow. It assumes a vehicle with only mandatory options, no cargo (internal

or external), a tongue load of 10-15% (conventional trailer) or king pin weight of 15-25%

(

fi

fth-wheel trailer), and driver only (150 lbs).

Consult your dealership (or the RV and

Trailer Towing Guide provided by your dealership) for more detailed information.

Tongue Load or Fifth-Wheel King Pin Weight

refers to the amount of the weight that a

trailer pushes down on a trailer hitch.

Examples:

For a 5000 lb conventional trailer, multiply 5000 by 0.10 and 0.15 to obtain a

proper tongue load range of 500 to 750 lbs. For an 11,500 lb

fi

fth-wheel trailer, multiply by

0.15 and 0.25 to obtain a proper king pin load range of 1,725 to 2,875 lbs.

WARNING

Never Exceed GVWR or GAWR Specifi cations:

  Exceeding the GVWR or the GAWR specifi ed on the certifi cation label is dangerous.
Exceeding any vehicle rating limitation could result in a serious accident, injury, or
damage to the vehicle.
  Do not use replacement tires with lower load carrying capacities than the originals
because they may lower the vehicle's GVWR and GAWR limitations. Replacement tires
with a higher limit than the originals do not increase the GVWR and GAWR limitations.
  Never exceed the GVWR or the GAWR specifi ed on the certifi cation label.

CX-5_8FN1-EA-16L_Edition1.indb 40

2016/12/12 10:07:35

«
...
626
627
628
629
630
...
»

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-52017

Brand: Vauxhall Pages: 2

Brand: RaceChip Pages: 20

Brand: AccuAir Pages: 40

Brand: Peak Pages: 10

2005 Sierra Denali

Brand: GMC Pages: 428

Brand: Mercedes-Benz Pages: 346

Brand: Thule Pages: 4

Brand: Cadillac Pages: 368

Brand: Luverne Pages: 3

Brand: Navman Pages: 27

Brand: Boyo Pages: 9

BASIC TLL171231

Brand: Tellur Pages: 5

Brand: Ecco Pages: 24

Brand: Oypla Leisure Pages: 4

Brand: Air Lift Pages: 28

Brand: Dolphin Pages: 16

Brand: Skoda Pages: 2

Brand: Jeep Pages: 292

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands