Mazda CX-52017 Owner'S Manual Download Page 567

Page: 567 / 664

7–25

If Trouble Arises

Warning/Indicator Lights and Warning Sounds

*Some models.

Signal

Warning

(Red)

High Engine Coolant

Temperature Warning

Indication/Warning

Light

The light

ashes when the engine coolant temperature is extremely high, and

illuminates when the engine coolant temperature increases further.

Handling Procedure

Flashing light

Drive slowly to reduce engine load until you can

nd a safe place to stop the vehicle

and wait for the engine to cool down.

Illuminated light

This indicates the possibility of overheating. Park the vehicle in a safe place

immediately and stop the engine.

Refer to Overheating 7-18 .

CAUTION

Do not drive the vehicle with the high engine coolant temperature warning light
illuminated. Otherwise, it could result in damage to the engine.

Power Steering

Malfunction Indication

The message is displayed if the electric power steering has a malfunction.

If the message is displayed, stop the vehicle in a safe place and do not operate the

steering wheel. There is no problem if the message in the display turns off after a while.

Contact an Authorized Mazda Dealer if the message is displayed continuously.

NOTE



If the message is displayed, the power steering will not operate normally. In this

case, the steering wheel can still be operated, however, the operation may feel heavy

compared to normal, or the steering wheel could vibrate when turning.



Repeatedly jerking the steering wheel left and right while the vehicle is stopped or

moving extremely slowly will cause the power steering system to go into protective

mode which will make the steering feel heavy, but this does not indicate a problem. If

this occurs, park the vehicle safely and wait several minutes for the system to return

to normal.

Power Steering

Malfunction Indicator

Light

The light illuminates/

ashes if the electric power steering has a malfunction.

If the light illuminates/

ashes, stop the vehicle in a safe place and do not operate the

steering wheel. There is no problem if the light turns off after a while. Contact an

Authorized Mazda Dealer if the light illuminates/

ashes continuously.

NOTE



If the indicator light illuminates/

ashes, the power steering will not operate normally.

If this happens, the steering wheel can still be operated, however, the operation may

feel heavy compared to normal, or the steering wheel could vibrate when turning.



Repeatedly jerking the steering wheel left and right while the vehicle is stopped or

moving extremely slowly will cause the power steering system to go into protective

mode which will make the steering feel heavy, but this does not indicate a problem. If

this occurs, park the vehicle safely and wait several minutes for the system to return

to normal.

CX-5_8FN1-EA-16L_Edition1.indb 25

2016/12/12 10:07:24

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands