Mazda CX-52017 Owner'S Manual Download Page 379

Page: 379 / 664

5–51

Interior Features

Audio Set [Type A (non-touchscreen)]

NOTE







The battery consumption of Bluetooth

audio devices increases while

Bluetooth

is connected.







If a general mobile phone device is

USB connected during music playback

over the Bluetooth

connection, the

Bluetooth

connection is disconnected.

For this reason, you cannot have music

playback over a Bluetooth

connection

and music playback using a USB

connection at the same time.







The system may not operate normally

depending on the Bluetooth

audio

device.

Switching to Bluetooth

audio

mode

To listen to music or voice audio recorded

to a Bluetooth

audio device, switch to

the Bluetooth

audio mode to operate

the audio device using the audio system

control panel. Any Bluetooth

audio

device must be paired to the vehicle's

Bluetooth

unit before it can be used.

Refer to Bluetooth

Preparation (Type A)

on page 5-38 .

1. Turn on the Bluetooth

audio device's

power.

2. Switch the ignition to ACC or ON.

Make sure that the “ ” symbol is

displayed in the audio display. The

symbol is not displayed if an un-paired

Bluetooth

audio device is being used

or the vehicle's Bluetooth

unit has a

malfunction.

NOTE

Some Bluetooth

audio devices need a

certain amount of time before the “ ”

symbol is displayed.

3. Press the media button (

) to

switch to the Bluetooth

audio mode

and start playback.

If the current device version is lower

than AVRCP Ver. 1.3:

“ BT Audio ” is

displayed.

If the current device is AVRCP Ver. 1.3:

The playback time is displayed.

NOTE







If the Bluetooth

audio device does not

begin playback, press the Play/Pause

button (4).







If a call is received on a hands-free

mobile phone during playback from the

Bluetooth

audio device, the playback is

stopped. Playback from the Bluetooth

audio device resumes after the call

ends.

Playback

1. To listen to a Bluetooth

audio device

over the vehicle's speaker system,

switch the mode to Bluetooth

audio mode. (Refer to “Switching to

Bluetooth

audio mode”)

2. To stop playback, press the Play/Pause

button (4).

3. Press the button again to resume

playback.

Selecting a

le (track)

Selects the next

le (track)

Short-press the track up button ( ).

Selects the beginning of the current

(track)

Short-press the track down button ( ).

CX-5_8FN1-EA-16L_Edition1.indb 51

2016/12/12 10:06:34

Summary of Contents for CX-52017

























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands

Mazda CX-52017, Owner'S Manual

Search results

Summary of Contents for CX-52017

Reviews:

Related manuals for CX-52017

Brands by name

Popular brands