User Manual Of EL8-EC** AC Servo
4
Tuning and running
Caution
Make sure the wirings of servo drive and servo motor are installed and fixed properly
before powering on.
On the first time tuning of the product, it is recommended to run unloaded until all the
parameter settings are confirmed to prevent any damage to the product or machine.
Usage
Caution
Please install an emergency stop button on machine to stop operation immediately if
there is an accident.
Please make sure machine is stopped before clearing an alarm.
Servo drive must be matched with specified motor.
Frequent restart of the servo system might incur damage to the product.
Servo drive and motor will be hot to touch shortly after power off. Please be careful.
Modification(s) to servo system is prohibited.
Error Handling
Warning
Please wait for 5 minutes after powering off for the electricity to be fully discharged
before uninstalling the cables.
Participate maintenance personals should have sufficient training in maintenance and
operation of this product series.
Caution
Please handle the error before clearing an alarm.
Keep away from machine after a restart upon alarm. Mechanical axis might suddenly
move. Such hazard should be prevented during the utilization of the product.
Model Selection
Caution
Rated torque of the servo motor should be higher than continuous designated torque
when fully loaded.
Load inertia ratio of the motor should be lower or equals to recommended value for
specified models
Servo drive must be matched with specified motor.
!
Caution
!
Caution
!
Warning
!
Caution
!
Caution
