Keysight N9923A, User Manual, Page: 194 / 276

194 Keysight N9923-90001 User’s Guide
File Management
Saving and Recalling Files
Figure 13-1 The FieldFox labeler
In the graphic above, the current filename is
File_0
. The cursor is on the
custom DTF_VSWR keyword. The file will be saved to USB (flash drive). File
Type is “Trace + State” (Instrument State).
How to move the cursor
— Use the rotary knob to move cursor on the same row. The cursor will change
rows when it comes to a row end.
— Use the arrows to move the cursor up and down the rows.
When the current filename is complete
— Press
Done
to save the file to the specified filename.
— Press Cancel to close the labeler without saving a file.
— If the filename already exists, you are prompted to choose from the
following:
—Press
Yes to overwrite the existing file.