Keysight N9923A, User Manual, Page: 178 / 276

178 Keysight N9923-90001 User’s Guide
Data Analysis Features
All about Markers
How to move a marker between data and memory traces
— Create a data and memory trace that will host the marker. Learn how in
“How to display data and memory traces” on page 189 .
— Press
Marker
and
Enter
to create a marker.
— Then
More .
— Then select the marker to move using Marker 1,2,3,4,5,6 .
— Then toggle
Marker Trace Auto Data Mem
.
—
Auto
- Marker resides on data trace when it is visible. Marker resides
on memory trace when only IT is visible (Default setting).
—
Data
- Marker resides on data trace, even when not visible.
—
Mem
- Marker resides on memory trace, even when not visible.
Marker Format
The Marker Format setting, available ONLY in NA Mode, allows you to choose
the format of the marker readout that appears in the upper-right corner of the
screen and in the marker table. The marker format can be independent of the
trace format, and can be set independently for each trace. All markers on a
trace have the same marker format.
How to choose marker format
— Press
Marker
— Then
More
— Then
Marker Format
— Then choose from the following:
Selection Example Y-axis value
Default
Same as displayed format
R + jX
Complex impedance format
(3rd number is distance for Time Domain)
22.8 Ω -j61.4 Ω
287.9fF
Z Magnitude
Impedance Mag.
66.08 Ω
Phase 73.8°
Real 0.2003
More
Imaginary -0.6727
Mag & Phase 0.705, -73.7°