Keysight Technologies N9030B, Service Manual

Page: 118 / 617

118 N9030B PXA Signal Analyzer Service Guide
Instrument Messages
Event Messages
–258
Media protected
A legal command or query could not be executed because the
media was protected. For example, the write-protect was set
–260
Expression error
An error was found with an expression type of data element. The
exact problem cannot be specifically identified.
–261
Math error in expression
An expression that has legal syntax could not be executed
because of a math error. For example, maybe you are dividing by
zero.
–270
Macro error
Indicates that a macro-related execution error occurred.
–271
Macro syntax error
Indicates a syntax error within the macro definition
–272
Macro execution error
Indicates that a syntactically legal macro program data sequence
could not be executed due to some error in the macro definition
–273
Illegal macro label
Indicates that the macro label defined in the *DMC command was
a legal string syntax, but could not be accepted
–274
Macro parameter error
Indicates that the macro definition improperly used a macro
parameter placeholder
–275
Macro definition too long
Indicates that a syntactically legal macro program data sequence
could not be executed because the string or block contents were
too long for the device to handle
–276
Macro recursion error
Indicates that a syntactically legal macro program data sequence
could not be executed because the device found it to be recursive
–277
Macro redefinition\ not
allowed
Indicates that a syntactically legal macro label in the *DMC
command could not be executed because the macro label was
already defined
–278
Macro header not found
Indicates that a syntactically legal macro label in the *GMC?
query could not be executed because the header was not
previously defined.
–280
Program error
There was an execution error in a down-loaded program. The
exact problem cannot be specifically identified.
–281
Cannot create program
Indicates that an attempt to create a program was unsuccessful. A
reason for the failure might include not enough memory.
–282
Illegal program name
The name used to reference a program was invalid; for example,
redefining an existing program, deleting a nonexistent program, or
in general, referencing a nonexistent program.
–283
Illegal variable name
An attempt was made to reference a nonexistent variable in a
program.
–284
Program currently running
Certain operations dealing with programs may be illegal while the
program is running; for example, deleting a running program
might not be possible.
Err# Message Verbose/Correction Information