manualshive.com logo in svg

Johnson Controls HS2016, Reference Manual

Introducing the NEO HS2016 - a cutting-edge device designed to enhance your every audio experience. Unlock its full potential with our comprehensive User Manual, available for free download at manualshive.com. Explore its features, setup instructions, troubleshooting tips, and more, right at your fingertips.

Share
Download
background image

Keypad Lockout Duration.....................................................................................................................  111
Remote Lockout DLS.............................................................................................................................  111
Remote Lockout Duration..................................................................................................................... 111

System Options................................................................................................................................ 111

[013] System Option 1...........................................................................................................................  111
[014] System Option 2...........................................................................................................................  113
[015] System Option 3...........................................................................................................................  114
[016] System Option 4...........................................................................................................................  115
[017] System Option 5...........................................................................................................................  116
[018] System Option 6...........................................................................................................................  117
[019] System Option 7...........................................................................................................................  118
[020] System Option 8...........................................................................................................................  119
[021] System Option 9...........................................................................................................................  121
[022] System Option 10......................................................................................................................... 122
[023] System Option 11......................................................................................................................... 123
[024] System Option 12......................................................................................................................... 124
[025] System Option 13......................................................................................................................... 125
[040] User Authentication..................................................................................................................... 126
[041] Access Code Digits.......................................................................................................................  126
[042] Verified Events.............................................................................................................................. 127

Partition Setup.................................................................................................................................  127

[151]-[158] Partition Auto-Arm/Disarm............................................................................................... 127
[200] Partition Mask............................................................................................................................... 128
[201]-[208] Partition Zone Assignment...............................................................................................  129
[300] Panel/Receiver Communication Paths......................................................................................  129
[301] Phone Number Programming.................................................................................................... 130
[304] Call Waiting Cancel String........................................................................................................... 130

Reporting.......................................................................................................................................... 131

[307] Zone Reporting............................................................................................................................. 131
[308] Event Reporting............................................................................................................................ 131

System Communications................................................................................................................ 138

[309] System Call Direction................................................................................................................... 138
[310] Account Codes.............................................................................................................................. 139
[311]-[318] Partition Call Directions..................................................................................................... 139
[350] Communicator Formats..............................................................................................................  140
[377] Communication Variables........................................................................................................... 140
[380] Communicator Option 1.............................................................................................................. 142
[381] Communicator Option 2.............................................................................................................. 144
[382] Communicator Option 3.............................................................................................................. 145
[383] Communicator Option 4.............................................................................................................. 145
[384] Communicator Backup Options................................................................................................. 146
[385] Audio Module Talk\Listen Mask................................................................................................. 146

DLS Programming...........................................................................................................................  147

[401] DLS/SA Options............................................................................................................................  147

9

PowerSeries Neo HS2016/HS2016-4/HS3032/HS2064/HS2064 E/HS2128/HS2129 E Alarm Controller Reference

Manual

Summary of Contents for HS2016





























































































































































































































































































Reviews:

No comments

Related manuals for HS2016

Lawler 570 Installation Manual preview
570
Brand: Lawler Pages: 2
Wave Italy IMPACT Installation, Use And Maintenance Manual preview
IMPACT
Brand: Wave Italy Pages: 16
TA Hydronics STS Technical Description preview
STS
Brand: TA Hydronics Pages: 14
Calpeda IDROMAT 5 Quick Start Manual preview
IDROMAT 5
Brand: Calpeda Pages: 4
Danfoss VLT 2800 Instruction Manual preview
VLT 2800
Brand: Danfoss Pages: 7
Hach SC4200c User Manual preview
SC4200c
Brand: Hach Pages: 36
Hach 2100Q User Instructions preview
2100Q
Brand: Hach Pages: 72
KAESER KOMPRESSOREN SIGMA CONTROL 2 User Manual preview
SIGMA CONTROL 2
Brand: KAESER KOMPRESSOREN Pages: 246
Quectel M85 User Manual preview
M85
Brand: Quectel Pages: 90
Patron Buggy User Instructions preview
Buggy
Brand: Patron Pages: 17
Vageo DT-1 Plus Manual preview
DT-1 Plus
Brand: Vageo Pages: 2
Vacon 100 INDUSTRIAL Additional Installation Instruction preview
100 INDUSTRIAL
Brand: Vacon Pages: 6
Vacon 100 INDUSTRIAL Technical Manual preview
100 INDUSTRIAL
Brand: Vacon Pages: 24
Vacon 100X series Marine Installation Manual preview
100X series
Brand: Vacon Pages: 30
Vacon 100 flow User Manual preview
100 flow
Brand: Vacon Pages: 81
Vacon 100X series Installation And Maintenance Manual preview
100X series
Brand: Vacon Pages: 100
Yealink EXP40 Quick Start Manual preview
EXP40
Brand: Yealink Pages: 8
Waterway NEO 1200 Instruction Manual preview
NEO 1200
Brand: Waterway Pages: 8

Brands by name

Popular brands

Load more brands