![background image](http://html.mh-extra.com/html/johnson-controls/hs2016/hs2016_reference-manual_2023751020.webp)
Wireless PG key
PGx929
UL
Wireless PG panic key
PGx938
UL
Wireless PG 2-button key
PGx949
UL
Wireless PG indoor siren
PGx901
UL
Wireless PG outdoor curtain PIR
PGX902
UL
Wireless PG outdoor siren
PGx911
UL
Wireless PG repeater
PGx920
UL
Wireless PG recessed contact
PGx307
UL
Wireless PG door/window contact
PGx303
UL
Wireless PG commercial contact
PGx309
Wireless PG outdoor contact
PGx312
UL
Wireless PG CO detector
PGX933
UL
Wireless PG smoke/heat detector
PGx936
UL
Wireless PG ceiling mount detector with Smart
Presence – long range
PGX872
Wireless PG ceiling mount detector with Smart
Presence – short range
PGX862
Wireless PG door/window contact
PGx975
UL
Wireless PG door/window contact w/ AUX
PGx945
UL
Central Station Receivers
SG-System I, II, III, IV, 5
Enclosures
The PowerSeries Neo main board can be installed in the metal enclosures listed below: Tamper protection switches can be
installed on all enclosures, including door opening protection and/or removal from the mounting position. Doors can be
secured using screws or keylock.
Model PC4050C (hinged door) made of 18Ga steel, painted beige, dimensions 305mm(L) x 376mm(W) x 124mm(W)
Model CMC-1 (hinged door) made of 18Ga steel (base) and 16Ga (door), painted beige, dimensions 287mm(L) x 298mm(W)
x 94mm(H)
Model PC5006C (removable door) made of 18Ga steel, painted white, dimensions 403mm(L) x 338mm(W) x 100mm(H)
Model PC5003C (removable door) made of 22Ga steel, painted, dimensions: 248mm(L) x 298mm(W) x 76mm(H)
For EN50131-1 Grade 2 compliant installations, all holes on the side of the cabinets shall be covered (plugged) if no
accessories are installed in the cabinet that will use these mounting holes.
The equipment enclosure shall be secured to the building structure before operation. Use 4 screws (appropriate for the wall
material on which it is attached) inserted through the four mounting holes provided in the back of the enclosure base.
Introduction
Installation
Overview of Installation Process
The steps below are provided to assist with the installation of the alarm system. Read over this
section to get an overall understanding of the order of installation. Working from this plan can help
reduce problems and reduce the overall time required for installation.
Step 1 – Create a Layout
Draw a rough sketch of the site and include all alarm detection devices, zone expanders, keypads
and other required modules.
Step 2 – Mount the Panel
PowerSeries Neo HS2016/HS2016-4/HS3032/HS2064/HS2064 E/HS2128/HS2129 E Alarm Controller Reference
Manual
20