Local label programming is done via a system keypad, as described below.
[000] Language Selection
(LCD keypads only)
Use this section to set the language displayed by LCD keypads. To select a language:
1. Enter Installer Programming: [*][8][Installer Code].
2. Enter programming section [000]>[000].
3. Key in the 2-digit number corresponding to the language required. See below:
01 = English
11 = Swedish
22 = Bulgarian
02 = Spanish
12 = Norwegian
23 = Latvian
03 = Portuguese
13 = Danish
24 = Lithuanian
04 = French
14 = Hebrew
25 = Ukrainian
05 = Italian
15 = Greek
26 = Slovakian
06 = Dutch
16 = Turkish
27 = Serbian
07 = Polish
18 = Croatian
28 = Estonian
08 = Czech
19 = Hungarian
29 = Slovenian
09 = Finnish
20 = Romanian
10 = German
21 = Russian
[001]-[128] Zone Labels
Customized labels can be created for each available zone. Labels can be programmed at the keypad
or downloaded/uploaded using DLS. The maximum label size is 14 x 2 ASCII characters.
Manual Labels
The following procedure describes how to add zone labels using the LCD keypad:
1. Enter Installer Programming: [*][8][Installer Code].
2. Press [*], scroll to Zone Labels and press [*] again.The first zone is displayed. Alternately,
press [000][001].
3. Scroll to the zone label to be programmed or key in the zone number. (e.g., 001 for zone label
1).
4. Scroll to the desired character’s location using the[<] [>] keys.
5. Enter the number of the corresponding character group until the desired character is
displayed (see the following table).
Example: Press the “2” key 3 times to enter the letter “
F.
”
Press the “2” key 4 times to enter the number “
2.
”
To delete a character, use the [<] [>] keys to move the cursor under the character, then
press [0].
If any key other than [<] or [>] is pressed before [0], the cursor moves one space to the
right and deletes that character.
6. Press [#] to save the changes and exit.
PowerSeries Neo HS2016/HS2016-4/HS3032/HS2064/HS2064 E/HS2128/HS2129 E Alarm Controller Reference
Manual
78
