manualshive.com logo in svg

IBM P260, Installation And Service Manual

The Samsung P260 Software Setup Manual is a comprehensive guide that provides step-by-step instructions for setting up and optimizing your device's software. This essential manual can be easily downloaded for free from our website, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

24.

Have the customer set the compute node system name. Complete the following steps:

a.

Access the ASMI. For information about how to access the ASMI, see Chapter 5, “Accessing the
service processor,” on page 33.

b.

The system name was recorded in step 5 on page 85 of this procedure. If the correct system name
is not displayed near the top of the ASMI Welcome pane, set the system name by clicking
System Configuration

> System Name.

25.

Have the customer ensure that the Time-Of-Day setting is correct. Complete the following steps:

a.

Access the ASMI. For information about how to access the ASMI, see Chapter 5, “Accessing the
service processor,” on page 33.

b.

Click System Configuration > Time Of Day.

c.

Ensure that the Time-Of-Day is set to the NTP mode or that the Time-Of-Day has the correct time
in Coordinated Universal Time (UTC).

Note:

If the Time-of-Day is set to the NTP mode, the ASMI center pane shows the following

message - Changing date/time is not allowed when the system is in NTP mode and you cannot
change the time. If the NTP mode is not set and the time is not correct in UTC, enter the correct
time and save. This operation can be completed only when the compute node is turned off.

26.

Is the compute node managed by a management console?

Yes

Continue with step 27.

No

Have the customer turn on the compute node, then continue with step 32 on page 90.

27.

Have the customer complete the following steps:

a.

Access the ASMI. For information about how to access the ASMI, see Chapter 5, “Accessing the
service processor,” on page 33.

b.

Click Power/Restart Control > Power On/Off System.

c.

Record the current setting in the Server firmware start policy field.

d.

Change the Server firmware start policy setting to Standby (User-Initiated).

e.

Click Save Settings and Power on.

28.

If the compute node has VIOS installed or uses more than one partition, have the customer restore
partition profile data by using one of the following methods:

v

If this system is managed by an FSM, ensure that the compute node is displayed on the Manage
Power Systems Resource

page. If the compute node is not displayed, complete the following

actions in sequence, as needed:

a.

Collect inventory on the chassis and request access. See Collecting inventory
(http://pic.dhe.ibm.com/infocenter/flexsys/information/topic/com.ibm.acc.8731.doc/
com.ibm.director.discovery.helps.doc/fqm0_t_collecting_inventory.html).

b.

If the compute node is still not displayed, reseat the compute node. See Removing the compute
node from an IBM Flex System Enterprise Chassis (http://pic.dhe.ibm.com/infocenter/
flexsys/information/topic/com.ibm.acc.7895.doc/removing_the_blade_server.html). Once the
FSM discovers the compute node, then collect inventory on the chassis and request access
again. See Collecting inventory (http://pic.dhe.ibm.com/infocenter/flexsys/information/
topic/com.ibm.acc.8731.doc/com.ibm.director.discovery.helps.doc/
fqm0_t_collecting_inventory.html).

c.

After the compute node is displayed on the Manage Power Systems Resource page, click
Hosts

. The compute node should have a state of Error with a detailed state of Recovery. This

state indicates that the profile data of the node must be recovered from the FSM. Recover the
partition profile data. For instructions, see Correcting a Recovery state for a server
(http://pic.dhe.ibm.com/infocenter/flexsys/information/topic/
com.ibm.acc.psm.troubleshooting.doc/
dpsm_troubleshooting_managedsystemstate_recovery.html).

88

Power Systems: IBM Flex System p260 and p460 Compute Nodes Installation and Service Guide

Summary of Contents for P260













































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for P260

Observator OMC-140 Operator'S Manual preview
OMC-140
Brand: Observator Pages: 44
Eneo VMC-8LCD-CP01 Installation And Operating Instruction preview
VMC-8LCD-CP01
Brand: Eneo Pages: 56
Chassis Plans CPX1-241 Technical Reference Manual preview
CPX1-241
Brand: Chassis Plans Pages: 72
AOC 203VW+ User Manual preview
203VW+
Brand: AOC Pages: 25
Atherton APVM121W User Manual preview
APVM121W
Brand: Atherton Pages: 32
IEM Mobil-O-Graph PWA Operating Manual preview
Mobil-O-Graph PWA
Brand: IEM Pages: 385
Mitsubishi 230SB User Manual preview
230SB
Brand: Mitsubishi Pages: 15
Beurer BC 42 Operating Instructions Manual preview
BC 42
Brand: Beurer Pages: 75
Hanns.G JC199 User Manual preview
JC199
Brand: Hanns.G Pages: 20
Eizo FlexScan L797 Specifications preview
FlexScan L797
Brand: Eizo Pages: 2
BAFANG DP C07.CAN User Manual preview
DP C07.CAN
Brand: BAFANG Pages: 14
DYNAPULSE DP-200M/Education Quick Manual preview
DP-200M/Education
Brand: DYNAPULSE Pages: 5
BabySense V35TX User Manual preview
V35TX
Brand: BabySense Pages: 18
Maxent MX-42HPM20 Owner'S Manual preview
MX-42HPM20
Brand: Maxent Pages: 30
Akron OZZIEMASTER 922 Installation, Operating And Maintenance Instructions preview
OZZIEMASTER 922
Brand: Akron Pages: 42
Healthy Living BVA-2007 Owner'S Manual preview
BVA-2007
Brand: Healthy Living Pages: 66
BenQ FP93G P User Manual preview
FP93G P
Brand: BenQ Pages: 39
HP D8901A Quick User Manual preview
D8901A
Brand: HP Pages: 16

Brands by name

Popular brands

Load more brands