Fukuda Denshi VaSera VS-1500, Service Manual

Page: 92 / 216

5-60
Confidential Copying Prohibited
Periodic Check List (2)
Conduct the routine inspection according to “Periodic Check List (2)”.
Management No.
Item Inspection Item Procedure and Criteria Judgment Remarks
1 Enclosure No scratch, crack, deformation and rust
Pass/Fail
2 Labels and panels No peeling and dust
Pass/Fail
Main Unit
3 Keys No damage
Pass/Fail
1
Power cable
No stain, rust, scratch and damage
Pass/Fail
2 Lead cable No stain, rust, scratch and damage
Pass/Fail
3 Clip electrodes No stain, rust, scratch and damage
Pass/Fail
4
Limb electrodes
No stain, rust, scratch and damage
Pass/Fail
5
Cuffs
No stain, rust, scratch and damage
Pass/Fail
6
Air hoses
No stain, rust, scratch and damage
Pass/Fail
7
PCG microphone
No stain, scratch and damage
Pass/Fail
8
Amorphous PW sensor
No stain, scratch and damage
Pass/Fail
9 Air bag pulse wave sensor No stain, scratch and damage
Pass/Fail
10
Chart paper
Loaded with no problem
Pass/Fail
V
isual Check
Accessories
11
Operation manual
Kept in specified location
Pass/Fail
1
Keys Smooth operation Pass/Fail
Mainframe
2
Recorder
Smooth operation with no abnormal sound Pass/Fail
1 Power cable Smooth application and removal
Pass/Fail
2 Lead cable Smooth application and removal
Pass/Fail
3 Clip electrodes Properly connected
Pass/Fail
4 Chest electrodes Properly connected
Pass/Fail
5 Cuffs
Smooth application and removal
No air leakage or breakage of center plate.
Pass/Fail
6 Air hoses
Smooth application and removal
No air leakage
Pass/Fail
7 PCG microphone
Smooth application and removal
Pass/Fail
8 Amorphous PW sensor
Smooth application and removal
Pass/Fail
Mechanical Check
Accessories
9 Air bag pulse wave sensor
Smooth application and removal
Sufficient air in air bag.
Pass/Fail
Power 1 Power supply Display turns ON at power ON.
Pass/Fail
1 Display Test No abnormality or flickering should be found.
Pass/Fail
Display
2 Display Test All dots should be displayed in correct colors
Pass/Fail
Touch Panel 1 Touch Panel Test The touched point should properly respond.
Pass/Fail
Control
Panel
1 Fixed Key Test
Symbol corresponding to the pressed key
should highlight.
Pass/Fail
Sound 1 Sound Test Proper sound or tone should generate.
Pass/Fail
1 Print Waveform should be properly printed
Pass/Fail
No zigzag running, irregular recording and
missed dots
Pass/Fail
Built-in
Recorder
2 Built-in recorder test
Recording speed should be within
5/10/12.5/25/50mm
± 3%.
Pass/Fail
Electrical Check
I/O 1 I/O Test No error should be found
Pass/Fail