Fukuda Denshi VaSera VS-1500, Service Manual

Page: 138 / 216

Chapter 8 Disassembly and Assembly
Confidential Copying Prohibited
8-21
(8) Install the MAIN_LCD cable, touch panel flexible cable and cable cover.
(9) Secure the inverter board and Flexield sheet using screws.
Connect touch panel cable connector.
*Be sure to lock.
Connect MAIN-LCD cable connector.
Connect so that pin 1 is located at the
bottom (gold cable)
* Route the cable in the groove of the
molding (marked
○
).
1. Insert the cable cover in the
direction of the arrow.
2. Raise the cable cover to
engage it with the claw
marked
○
.
①
②
Push in the direction of
the arrow to place it inside
the LCD shield plate.
Secure locations (2)
marked
○ using:
W SEMS (L) M3
x
8
Flexield sheet
* Fit the L-shaped portion of
the plate starting at the
bottom to cover the flexible
Secure location (1)
marked
○
using:
W SEMS (L) M3
x
8