Fukuda Denshi VaSera VS-1500, Service Manual

Page: 128 / 216

Chapter 8 Disassembly and Assembly
Confidential Copying Prohibited
8-11
8.2 Instrument Assembly
8.2.1 Main Block Assembly
(1) Insert the air tube in the connector to assemble the main chassis SU.
(2) Connect the BP cable and air tube to the pump block assembly.
(3) Mount the pump block assembly parts on the main chassis SU in the following order: [Red]
Æ [Yellow] Æ
[Black] Æ [Green].
Place this below the main
chassis and screw it down.
Secure locations (2) marked
○
using:
W SEMS (L) M3 × 8
Red
Yellow
Black
Green
If the air tube is difficult to
insert, apply ethanol to the
connector.
[Red]
Insert section marked ○ in the
notch of the main chassis.
Make sure part is properly seated
before securing using screws!
[Yellow]
[Green]
Red
Yellow
Black
Green
BP cable connections
Insert air tube over
connector.
* Make sure that
surrounding cables do
not prevent full insertion
of tube.
Secure locations (4) marked using:
W SEMS (L) M3 x 8
[Black]