Fukuda Denshi VaSera VS-1500, Service Manual

Page: 132 / 216

Chapter 8 Disassembly and Assembly
Confidential Copying Prohibited
8-15
8.2.2 Lower Case Assembly Drawing
(1) Place the equipotential clamp in the lower instrument case and secure the main block using screws.
(2) Secure the power supply unit, PCB-7098 assembly and speaker assembly using screws and connect the
connectors.
Make sure connectors are properly seated
after the part has been screwed down.
Check green cable also on pump unit side
connector.
Secure locations (4) marked ○
using:
P tight WH M3 × 12
Align the opening in the panel with the
lower instrument case boss to install the
equipotential clamp.
PCB-7098 assembly
Secure locations (2) marked
○ using:
P tight pan head WH M3 × 12
Speaker assembly
Place cable facing up.
Secure locations (2) marked
○
using:
P tight pan head WH M3 × 12
Power supply unit
Secure locations (3) marked
○
using:
P tight pan head WH M3 × 12