Fukuda Denshi VaSera VS-1500, Service Manual

Page: 153 / 216

Chapter 8 Disassembly and Assembly
8-36
Confidential Copying Prohibited
4. Attach the front-end hose clip to the OA-300A holder cover. * Firmly press the side with the
adhesive. [Refer to Figure 3.]
5. Attach the sensor cable clip so that the hook is positioned under the arm (inside). [Refer to
Figure 4.]
6. When two or more sensor cables are used, use spiral tubes at sections where cable overlap,
to prevent cable entanglement.
7. To ensure that the sensor cables and air hoses are not pinched when the hose hanger is
turned, provide enough slack in hoses and cables at joints. [Refer to Figure 5.]
Front-end Hose Clip
Sensor
Cable Clip
Provide
enough slack.
[Figure 5 Example of Hose Hanger Usage]
[Figure 4 Completed Assembly]
[Figure 3]