Fukuda Denshi VaSera VS-1500, Service Manual

Page: 145 / 216

Chapter 8 Disassembly and Assembly
8.4 Installation of the Cuff Holder OAV-01A
By attaching the OAV-01A to the top plate of the trolley (OTV-01), the cuffs for the VS-1500 can
be stored.
8.4.1 Parts List
Name Q’ty Function
Cuff Holder 1 Stores the cuffs used with the Vasera Series
Securing Screws 2 Screws for securing the holder to the trolley top.
8.4.2 Installation Procedure
*The following procedure requires a Phillips screwdriver (M3).
(1) As shown in the figure below, hold the cuff holder at an oblique angle relative to the lower front
end (the side with the raised guides) of the trolley plate. Engage one end of the holder with the
raised guide on one side then engage the guide on the other side.
(2) Use the screws to firmly secure the center portion of the cuff holder.
Raised guide (one on each side)
Cuff holder Securing screws (x2)
CAUTION
● Do not use this holder for items other than BP cuffs.
●
Do not lean against the cuff holder or place heavy objects on it. The holder could become
deformed or damaged.
● Do not attach the holder in a location other than specified.
8-28
Confidential Copying Prohibited