Digi TX54, User Manual

Page: 10 / 1087

TX54 User Guide 10
Connect data cables 34
Connect antennas 34
Mount the TX54 to a mounting surface 34
Connect power 35
Mount and ground chassis 35
TX54 electrical rating 36
TX54 power connector 37
Battery power management 37
Configuration and management
Review TX54 default settings 39
Local WebUI 39
Digi Remote Manager 39
Default interface configuration 39
Other default configuration settings 43
Change the default password for the admin user 43
Reset default SSIDs and pre-shared keys for the preconfigured Wi-Fi access points 45
Configuration methods 47
Using Digi Remote Manager 49
Access Digi Remote Manager 49
Using the web interface 49
Log out of the web interface 50
Use the local REST API to configure the TX54 device 50
Use the GET method to return device configuration information 50
Use the POST method to modify device configuration parameters and list arrays 52
Use the DELETE method to remove items from a list array 53
Using the command line 55
Access the command line interface 55
Log in to the command line interface 55
Exit the command line interface 56
Interfaces
Wide Area Networks (WANs) 58
Wide Area Networks (WANs) and Wireless Wide Area Networks (WWANs) 60
Configure WAN/WWAN priority and default route metrics 60
WAN/WWAN failover 63
Configure SureLink active recovery to detect WAN/WWAN failures 64
Configure the device to reboot when a failure is detected 75
Disable SureLink 83
Example: Use a ping test for WAN failover from Ethernet to cellular 87
Using Ethernet devices in a WAN 91
Using cellular modems in a Wireless WAN (WWAN) 92
Configure a Wide Area Network (WAN) 116
Configure a Wireless Wide Area Network (WWAN) 125
Show WAN and WWAN status and statistics 135
Delete a WAN or WWAN 137
Default outbound WAN/WWAN ports 139
Local Area Networks (LANs) 140
About Local Area Networks (LANs) 141
Configure a LAN 141
Example: Configure two LANs 149
Show LAN status and statistics 159