Digi TX54, User Manual

Page: 316 / 1087

Hotspot Hotspot configuration
TX54 User Guide 316
(config network hotspot new_hotspot)> local_page HTML_filename
(config network hotspot new_hotspot)>
Normally, this parameter should be left blank, and the device will use the default
authentication HTML page. See
Hotspot authentication modes for information about the
default authentication HTML page used for each authentication mode.
If you upload a custom HTML file that uses a filename other than the default filename, type the
custom filename here. See
Upload custom hotspot HTML pages for more information about
creating and uploading custom HTML files.
11. (Optional) Set the port number that the hotspot authentication server will used.
(config network hotspot new_hotspot)> auth_port port
(config network hotspot new_hotspot)>
The default is 3990 .
12. (Optional) Set the port number of the hotspot server.
(config network hotspot new_hotspot)> server_port port
(config network hotspot new_hotspot)>
The default is 4990 .
13. If remote is selected for login :
a. Set the IP address or fully-qualified domain name or the remote web server that will be
used for client authentication:
(config network hotspot new_hotspot)> remote url address
(config network hotspot new_hotspot)>
a. (Optional) Set the shared secret that the remote server and the hotspot. Used with cloud-
based hotspot providers.
(config network hotspot new_hotspot)> remote secret secret
(config network hotspot new_hotspot)>
14. (Optional) Change the default DHCP server configuration.
Note The hotspot DHCP server is automatically enabled and cannot be disabled.
a. Set the amount of time that a client DHCP lease is valid:
(config network hotspot new_hotspot)> ipv4 address dhcp_server lease_
time
value
(config network hotspot new_hotspot)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the
format number { w|d|h|m|s }.
For example, to set lease_time to ten minutes, enter either 10m or 600s :
(config network hotspot new_hotspot)> ipv4 dhcp_server lease_time 600s
(config network hotspot new_hotspot)>