Digi TX54, User Manual

Page: 221 / 1087

Serial port Add a USB serial port
TX54 User Guide 221
where mode is either:
n
login : Allows the user to log into the device through the serial port.
n
remote : Allows for remote access to another device that is connected to the serial port.
n application : Provides access to the serial device from Python applications. See Use
Python to access serial ports for information about creating Python applications that
access the serial port.
n
modbus : Allows you to use the serial port for Modbus. See Modbus gateway .
n
udpserial : Provides access to the device through a UDP serial port. See Configure UDP
serial mode .
The default is Login.
5. (Optional) Set a label that will be used when referring to this port.
(config serial USB_port)> label label
(config serial USB_port)>
6. If mode is set to login or remote :
a. Set the baud rate used by the device to which you want to connect:
(config serial USB_port)> baudrate rate
(config serial USB_port)>
b. Set the number of data bits used by the device to which you want to connect:
(config serial USB_port)> databits bits
(config serial USB_port)>
c. Set the type of parity used by the device to which you want to connect:
(config serial USB_port)> parity parity
(config serial USB_port)>
Allowed values are:
n
even
n
odd
n
none
The default is none .
d. Set the stop bits used by the device to which you want to connect:
(config serial USB_port)> stopbits bits
(config serial USB_port)>
e. Set the type of flow control used by the device to which you want to connect:
(config serial USB_port)> flow type
(config serial USB_port)
Allowed values are: