User authentication
User authentication methods
TX54 User Guide
730
Where
n
is index number of the authentication method to be deleted. For example, to delete
the authentication method as displayed by the example
show
command, above:
(config)> del auth method 2
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Rearrange the position of authentication methods
WebUI
Authentication methods are reordered by changing the method type in the
Method
drop-down for
each authentication method to match the appropriate order.
For example, the following configuration has
Local users
as the first method, and
RADIUS
as the
second.
To reorder these so that
RADIUS
is first and
Local users
is second:
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
Summary of Contents for TX54
