Interfaces
Local Area Networks (LANs)
TX54 User Guide
143
New LANs are enabled by default. To disable, click
Enable
.
5. For
Interface type
, leave at the default setting of
Ethernet
.
6. For
Zone
, select the appropriate firewall zone. See
for further
information.
7. For
Device
, select an Ethernet device, a Wi-Fi access point, or a bridge. See
for more
information about bridging.
8. (Optional) Click to expand
802.1x
to configure 802.1x port based network access control.
The TX54 can function as an 802.1x authenticator; it does not function as an 802.1x supplicant.
a. Click to expand
Authentication
.
b. Click
Enable server
to enable the 802.1x authenticator on the TX54 device.
c. Type the
Server IP address
of the authentication server.
d.
Server Port number
defaults to
1812
. Type a new port number for the authentication
server if different than the default.
e. Type the
Server Password
for the authentication server.
f. Set the
Reauth
period.
g. (Optional) Click to expand
Accounting
.
h. Click
Enable server
to enable 802.1x authentication auditing on the TX54 device.
i. Type the
Server IP address
of the auditing server.
j.
Server Port number
defaults to
1813
. Type a new port number for the auditing server if
different than the default.
k. Type the
Server Password
for the auditing server.
9. Configure IPv4 settings:
a. Click to expand
IPv4
.
IPv4 support is enabled by default.
b. For
Type
, select
Static IP address
.
c. For
Address
, type the IP address and subnet of the LAN interface. Use the format
IPv4_
address
/
netmask
, for example, 192.168.2.1/24.
d. Optional IPv4 configuration items:
i. Set the
Metric
.
ii. For
Weight
, type the relative weight for default routes associated with this interface.
For multiple active interfaces with the same metric,
Weight
is used to load balance
traffic to the interfaces.
iii. Set the
Management priority
. This determines which interface will have priority for
central management activity. The interface with the highest number will be used.
iv. Set the
MTU
.
Summary of Contents for TX54
